Brake Adjustment
Every time the brakes are applied, with or without the vehicle moving, the brakes adjust for wear.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, check that the
compass zone is set to the variance zone in
which the vehicle is located. See “Compass
Variance (Zone) Procedure” earlier in this section.
...
Traction Control System (TCS)/StabiliTrak® Light
The Traction Control System (TCS)/StabiliTrak light comes on briefly
when the engine is started.
If the light does not come on, have
the vehicle serviced by the dealer.
If the system is workin ...
Checking Coolant
The vehicle must be on a level surface when checking
the coolant level.
Check to see if coolant is visible in the coolant recovery
tank. If the coolant inside the coolant recovery tank is
boili ...
