Care of CDs

If playing a CD-R, the sound quality can be reduced due to CD-R quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R has been handled. Handle them carefully.

Store CD-R(s) in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom surface of the disc. If the surface of a CD is damaged, such as cracked, broken, or scratched, the CD does not play properly or not at all. Do not touch the bottom side of a CD while handling it; this could damage the surface. Pick up CDs by grasping the outer edges or the edge of the hole and the outer edge.

If the surface of a CD is soiled, take a soft, lint free cloth or dampen a clean, soft cloth in a mild, neutral detergent solution mixed with water, and clean it. Make sure the wiping process starts from the center to the edge.

    See also:

    PASS-Key® III+ Electronic Immobilizer
    See Radio Frequency Statement for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. ...

    Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps
    A. Sidemarker Lamp B. Stoplamp/Taillamp/Turn Signal Lamp To replace one of these bulbs: 1. Open the trunk. See Trunk. 2. Remove the convenience net. 3. Remove the plastic wing nuts retaining th ...

    Treadwear
    The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 ...