Exiting the Feature Settings Menu

The feature settings menu will be exited when any of the following occurs:

• The vehicle is shifted out of P (Park).

• The vehicle is no longer in ON/RUN.

• The trip/fuel or vehicle information DIC buttons are pressed.

• The end of the feature settings menu is reached and exited.

• A 40 second time period has elapsed with no selection made.

    See also:

    Adding Washer Fluid
    Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview  for reservoir location. Notice When using concentrated washer fluid, ...

    Using the Delete All Name Tags Command
    The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if stored. To delete all name tags: 1. Press . ► For vehicles without a navigation sy ...

    If a Tire Goes Flat
    It is unusual for a tire to blow out while driving, especially if the tires are maintained properly. If air goes out of a tire, it is much more likely to leak out slowly. But if there ever is a bl ...