Automatic Operation
AUTO (Automatic Fan): When AUTO is selected on the fan control, the system automatically adjusts the fan speed. If the OnStar® system is activated when this position is selected, the fan speed will lower.
See also:
Using the Delete Command
The delete command is used to delete specific name tags.
To delete name tags:
1. Press
.
► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.
...
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight
of occupants and cargo should never exceed
XXX kg or XXX lbs” on your vehicle’s
placard.
2. Determine the combined weight of the driver
and pass ...
To Use the Engine Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord. The electrical cord is located
on the passenger side of the engine compartment, near the air cleaner.
3. Plug it into a n ...
