Reducing Speed While Using Cruise Control

To reduce your speed while using cruise control:

• Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it.

• To slow down in very small amounts, press the SET– button on the steering wheel briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower.

    See also:

    Turn Signals When Towing a Trailer
    The arrows on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes ...

    Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps
    A. Sidemarker Lamp B. Stoplamp/Taillamp/Turn Signal Lamp To replace one of these bulbs: 1. Open the trunk. See Trunk. 2. Remove the convenience net. 3. Remove the plastic wing nuts retaining th ...

    Instrument Panel, Vinyl, and OtherPlastic Surfaces
    A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and d ...