Listing All Paired and Connected Phones

1. Press ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone..

► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.

► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.

2. Say “Bluetooth.” The system responds “Bluetooth ready,” followed by a tone.

3. Say “List.” The system lists all paired Bluetooth devices. The system will respond “is connected” if a phone is connected to the vehicle.

    See also:

    Wipe Parking
    If the ignition is turned to LOCK/ OFF while the wipers are on 1, 2, or , they will immediately stop. If the windshield wiper lever is then moved to before the driver door is opened, or within 1 ...

    Starting the Vehicle with a Low Transmitter Battery
    If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time. ...

    Headlamps, Front Turn Signal, andParking Lamps
    To replace a bulb, do the following: 1. Open the hood. 2. Remove the grille by grasping and pulling it forward. 3. Lift the two headlamp retaining clips. 4. Pull the headlamp assembly away from ...