Heated and Ventilated Seats
On vehicles with heated and ventilated seats, the controls are located on the front doors and the ignition must be on to use the feature.
: Press to heat the seat and
seatback.
: Press to heat the seatback.
: Press to ventilate the seat and
seatback.
For more information see Heated and Ventilated Seats .
See also:
Jump Starting (On-board with eAssist Only)
If the vehicle fails to crank, it may
be jump started by using the eAssist
battery to charge the 12-volt battery.
Use the following procedure to
activate the on-board jump start
using the DIC ...
Lock Sensor
When all doors are closed and the ignition is off, the vehicle can be locked
by pressing this area on the door handle. This feature will be available for several
minutes after the vehicle has be ...
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from you ...