Canceling a Remote Start

To cancel a remote start:

• Aim the RKE transmitter at the vehicle and press and hold turn off. until the parking lamps turn off.

• Turn on the hazard warning flashers.

• Turn the ignition switch on and then off.

See Remote Vehicle Start.

    See also:

    License Plate Lamp
    To replace one of these bulbs: Passenger Side Shown, Driver Side Similar 1. Push the release tab (A) toward the lamp assembly. 2. Pull the lamp assembly down to remove. A. Bulb Socket B. B ...

    Convenience Net
    Use the convenience net, located in the rear, to store small loads as far forward as possible. The net should not be used to store heavy loads. ...

    Tire and Loading Information Label
    Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle center pillar (B-pillar). With the driver door open, you will find the label attached below the do ...