Headlamps
The headlamp wiring is protected by four fuses.
An electrical overload will cause a lamp to go on and off. If this happens, have your headlamp wiring checked right away.
See also:
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
...
Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle in P (Park).
To avoid excessive drain on the battery, it is
recommended that the headlamps are turned off.
2. Press the customization button to enter ...
Automatic Transmission
The automatic transmission has a shift lever located on the console between the
seats.
The selected gear is also shown in the instrument cluster.
P (Park): This position locks the drive wheels ...