See also:

Storing a Flat or Spare Tire and Tools With a Screw in Fastener
1. Turn the wrench counterclockwise to remove the fastener. 2. Replace the fastener with the one provided in the foam. 3. Turn the wrench clockwise to tighten the fastener. 4. Replace the ...

Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off. ...

Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See En ...