See also:

Starting the Vehicle
1. Aim the RKE transmitter at the vehicle. 2. Press and release . 3. Immediately after completing Step 2, press and hold until the turn signal lamps flash, or for about two seconds if the vehicl ...

License Plate Lamp
To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down to remove it from the fascia. A. Bulb Socket B. Bulb C. Lamp Assembly ...

Tire and Loading Information Label
Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). The Tire and Loading Information label shows the number of occup ...