Tire Inspection

We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month.

Replace the tire if:

  • The indicators at three or more places around the tire can be seen.
  • There is cord or fabric showing through the tire's rubber.
  • The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric.
  • The tire has a bump, bulge, or split.
  • The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage.
    See also:

    Uniform Tire Quality Grading
    Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPM ...

    Fog Lamps
    Use the fog lamps for better vision in foggy or misty conditions. The ignition must be in RUN for the fog lamps to work. The fog lamp button is located on the instrument panel to the right of ...