Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule for more information.
Replacement blades come in different types and are removed in different ways. For proper type and length, see Maintenance Replacement Parts .
Notice: Allowing the wiper arm to touch the windshield when no wiper blade is
installed could damage the windshield. Any damage that occurs would not be covered
by your warranty. Do not allow the wiper arm to touch the windshield.
To replace the windshield wiper blade:
1. Pull the windshield wiper assembly away from the windshield.
2. Press the button in the middle of the wiper arm connector, and pull the wiper blade away from the arm connector.
3. Remove the wiper blade.
4. Reverse Steps 1 through 3 for wiper blade replacement.
See also:
How to Detect a Tamper Condition
If is pressed and the horn sounds,
an attempted break-in occurred while the system was armed.
If the alarm has been activated, a message will appear on the DIC. See Anti-theft
Alarm System Messa ...
TPMS Sensor Identification Codes
Each TPMS sensor has a unique identification
code. Any time you replace one or more of
the TPMS sensors or rotate the vehicle’s tires, the
identification codes will need to be matched to
the new ...
Adding Equipment to Your
Airbag-Equipped Vehicle
Q: Is there anything I might add to or change
about the vehicle that could keep the airbags
from working properly?
A: Yes. If you add things that change your vehicle’s
frame, bumper system, h ...