Clock
The infotainment system controls are used to access the time and date settings through the menu system. See Operation for information about how to use the menu system.
Setting the Time and Date
1. Press the CONFIG button and select Time and Date Settings.
2. Select Set Time or Set Date.
3. Turn the 
knob to adjust the highlighted value.
4. Press the 
knob to select the next value.
5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the 
knob after adjusting the minutes.
Setting the 12/24 Hour Format
1. Press the CONFIG button and select Time and Date Settings.
2. Highlight 12/24 HR Format.
3. Press the knob to select the 12 hour or 24 hour display format.
Setting the Month and Day Format
1. Press the CONFIG button and select Time and Date Settings.
2. Highlight Month & Day format.
3. Press the knob to select DD/MM/YYYY (day/month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/DD (year/month/ day) display format.
See also:
Error Messages
If Disc Read Error displays and/or
the disc comes out, it could be for
one of the following reasons:
• The disc has an invalid or
unknown format.
• The disc is not from a correct
region. ...
Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected
from short circuits by a combination of fuses
and circuit breakers. This greatly reduces
the chance of fires caused by electrical problems.
Look ...
Sensors
The solar sensor, located in the defrost grille, in the
middle of the instrument panel, monitors the solar
radiation. Do not cover the solar sensor or the system
will not work properly.
There ...