Selecting an XM Channel

XM channels can be selected by usingsor , the TUNE/ MENU knob, or the TUNE/MENU or system., the TUNE/ MENU knob, or the TUNE/MENU system.

Selecting a Channel Using or

  • Press and release to go to the previous or next or channel. to go to the previous or next channel.
  • Press and hold \to scroll through the previous or or next channel until the channel is reached. \to scroll through the previous or next channel until the channel is reached.

Selecting a Channel Using the TUNE/MENU Knob

To select a channel using the TUNE/MENU knob:

1. Turn the TUNE/MENU knob and select Channel List.

2. Select the desired channel.

Selecting a Channel Using the TUNE/MENU System

1. Turn the TUNE/MENU knob.

2. Select XM Category List.

3. Select the category.

4. Select the channel.

    See also:

    Object Detection System Messages
    PARK ASSIST OFF This message displays when the park assist system has been turned off or when there is a temporary condition causing the system to be disabled. See Ultrasonic Parking Assist ...

    Sunroof
    The vehicle may be equipped with a power sliding sunroof. To open or close the sunroof, the ignition must be turned to ON, ACCESSORY, or Retained Accessory Power (RAP) must be active. Press and ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard wa ...