Lamps On Reminder

The lamps on reminder light comes on when the lights are in use.
See also:
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase vehicle speed.
When you take your foot off the pedal, the vehicle
will slow down to the cruise speed you set earlier. ...
Manual Mode
Driver Shift Control (DSC)
Notice: Driving with the engine at a high rpm without upshifting while using
Driver Shift Control (DSC), could damage the vehicle. Always upshift when necessary
while u ...
Without Selective Ride Control
1. Move the shift lever to the left
from D (Drive).
The transmission will enter
Manual Mode. The DIC gear
indicator will change to an M
followed by a number
representing the gear the vehicl ...
