Remote Keyless Entry (RKE) System

See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

If there is a decrease in the RKE operating range:

  • Check the distance. The transmitter may be too far from the vehicle.
  • Check the location. Other vehicles or objects may be blocking the signal.
  • Check the transmitter's battery. See “Battery Replacement” later in this section.
  • If the transmitter is still not working correctly, see your dealer or a qualified technician for service.
    See also:

    Jump Starting (On-board with eAssist Only)
    If the vehicle fails to crank, it may be jump started by using the eAssist battery to charge the 12-volt battery. Use the following procedure to activate the on-board jump start using the DIC ...

    Making a Call
    Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial: This command allows a ph ...

    Passenger Safety Belt Reminder Light
    When the vehicle is started, this light flashes and a chime may come on to remind front passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. Fo ...