See also:

Parking/Turn Signal Lamp
1. Open the hood. See Hood . 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straig ...

Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handl ...

Lumbar Adjustment
To adjust the lumbar support: ► Press and hold the front or rear of the control to increase or decrease lumbar support. ► Press and hold the top or bottom of the control to raise or lo ...