Connecting a USB Storage Device or iPod®

To connect a USB storage device, connect the device to the USB port located in

To connect a USB storage device, connect the device to the USB port located in the instrument panel storage area. See Instrument Panel Storage  for more information.

The USB port can be used to control an iPod or a USB storage device.

To connect an iPod, connect one end of the USB cable that came with the iPod to the iPod’s dock connector, and connect the other end to the USB port located in the instrument panel storage area.

If the vehicle is on and the USB connection works, “OK to disconnect” and a GM logo may appear on the iPod, and iPod appears on the radio's display.

The iPod music appears on the radio’s display and begins playing.

The iPod charges while it is connected to the vehicle if the vehicle is in the ACC/ACCESSORY or ON/RUN position. When the vehicle is turned off, the iPod automatically powers off and will not charge or draw power from the vehicle's battery.

If you have an older iPod model that is not supported, it can still be used by connecting it to the auxiliary input jack using a standard 3.5 mm (1/8 in) stereo cable. See Auxiliary Devices  for more information.

    See also:

    Programming Universal HomeRemote — Rolling Code
    Rolling code garage door openers are used for garage doors produced after 1996 and are code protected. Rolling code means the coded signal is changed every time your remote control garage door ope ...

    Purposeful technology
    Comprehensive connectivity is enabled by OnStar's remote vehicle access, which makes keeping tabs on the vehicle a breeze from anywhere with a smart phone. Highlights include: Passive entry Hea ...

    Lower Anchors and Tethers for Children (LATCH System)
    The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and atta ...