Connecting a USB Storage Device or iPod®

To connect a USB storage device, connect the device to the USB port located in

To connect a USB storage device, connect the device to the USB port located in the instrument panel storage area. See Instrument Panel Storage  for more information.

The USB port can be used to control an iPod or a USB storage device.

To connect an iPod, connect one end of the USB cable that came with the iPod to the iPod’s dock connector and connect the other end to the USB port located in the instrument panel storage area.

If the vehicle is on and the USB connection works, “OK to disconnect” and a GM logo may appear on the iPod, and iPod appears on the radio's display.

The iPod music appears on the radio’s display and begins playing.

The iPod charges while it is connected to the vehicle if the vehicle is in the ACC/ACCESSORY or ON/RUN position. When the vehicle is turned off, the iPod automatically powers off and will not charge or draw power from the vehicle's battery.

If you have an older iPod model that is not supported, it can still be used by connecting it to the Auxiliary Input Jack using a standard 3.5 mm (1/8 in) stereo cable. See Auxiliary Devices  for more information.

    See also:

    Audio Output
    Audio from the DVD player or auxiliary inputs may be heard through the following possible sources: • Wireless Headphones • Vehicle Speakers • Vehicle wired headphone jacks on the Rear Sea ...

    Glove Box
    Lift up on the lever to open it. The glovebox features a pen holder (A). The intermediate shelf (B) can be removed by pulling on the front edge. To reinstall the shelf, slide it into the side g ...

    License Plate Lamp
    The license plate lamps for this vehicle are on the trunk lid. To replace one of these bulbs: 1. Open the trunk. See Trunk for more information. 2. Push the end on either of the lamp assembli ...