Memory Features

On vehicles with the memory feature, the controls on the driver door are used

On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column, if available.

Storing Memory Positions

To save into memory:

1. Adjust the driver seat and seatback recliner, both outside mirrors, and the power steering column, if available.

See Power Mirrors  and Steering Wheel Adjustment  for more information.

Not all vehicles will have the ability to save and recall the mirror positions.

2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.” To recall, press and release "1" or "2." The vehicle must be in P (Park).

► single beep will sound. The seat and outside mirrors will move to the position previously stored for the identified driver.

See Memory Seats  and Vehicle Personalization  for more information.

Easy Exit Posit

The easy exit feature can move the driver seat rearward and the power steering column, if available, up and forward to allow extra room to exit the vehicle.

► : Press to recall the easy exit positions. The vehicle must be in P (Park).

See Memory Seats  and Vehicle Personalization  for more information.

    See also:

    Exterior Lighting
    The exterior lamps control is located on the instrument panel, to the left of the steering wheel. : Turns the automatic light control on or off. AUTO: Automatic operation of the headlamps at ...

    When the System Does Not Seem to Work Properly
    If the URPA system will not activate due to a temporary condition, the message PARK ASSIST OFF will be displayed on the DIC and a red light will be shown on the rear URPA display when the shift ...

    Tire Rotation and Required Services Every 12 000 km/7,500 mi
    Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation . Check engine oil level and oil life percentage. If needed, change engine oil and filt ...