Remote Vehicle Start

Starting the Vehicle

With this feature the engine can be started from outside of the vehicle.

1. Aim the RKE transmitter at the vehicle.
2. Press and release 3. Immediately after completing Step 2, press and hold
3. Immediately after completing Step 2, press and hold When the vehicle starts, the parking lamps will turn on and remain on as long until the parking lamps flash.

When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running.

The doors will be locked and the climate control system may come on.

The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.

Canceling a Remote Start

To cancel a remote start:

 Aim the RKE transmitter at the vehicle and press and hold lamps turn off. until the parking lamps turn off.
► Turn on the hazard warning flashers.
► Turn the ignition switch on and then off.

See Remote Vehicle Start .

See also:

Memory Features
On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positio ...

Starter Switch Check
WARNING: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room ...

To Transfer Audio to the Cell Phone
During a call with the audio in the vehicle: 1. Press . The system responds with “Ready” followed by a tone. 2. Say “Transfer Call.” The system responds with “Transferring call” an ...