Radio (s)
Press to turn the system on and off. Turn to increase or decrease the volume.
RADIO/BAND: Press to choose between FM, AM, or XM™, if equipped.
Turn to select radio stations.
Press to seek the previous station or track.
Press to seek the next station or track.
Buttons 1 to 6: Press to save and select favorite stations.
INFO: Press to show available information about the current station or track, or to display the time when the ignition is off.
For more information about these and other radio features, see Operation .
Storing a Favorite Station
Stations from all bands can be stored in the favorite lists in any order. Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.
To store the station to a position in the list, press the corresponding numeric button 1 to 6 until a beep is heard. The stored station will begin playback.
For more information, see “Storing a Station as a Favorite” in AM-FM Radio .
Setting the Clock
Adjusting the Time
1. Press the CONFIG button and select Time and Date Settings.
2. Select Set Time.
3. Turn the
knob to adjust the
highlighted number.
4. Press the
knob to select the
next number.
5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the
button after adjusting the minutes.
Setting the 12/24 Hour Format
1. Press the CONFIG button and select Time and Date Settings.
2. Highlight 12/24 Hour Format.
3. Press the
button to select the 12 hour or 24 hour display format.
For detailed instructions on setting the clock, see Clock .
See also:
Radio Menus (Radio with CD)
Radio menus are available for AM and FM.
Turn the TUNE/MENU knob to open the main radio menu for that band.
Selecting a Band
Press the RADIO/BAND button to choose AM, FM, or XM, if equipped. The la ...
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allow ...
Removing the Flat Tire andInstalling the Spare Tire
1. If your vehicle has a wheel cap that covers
the wheel nuts, position the chisel end of the
wheel wrench in the notch and pry it off.
2. Using the wheel
wrench, loosen all
the wheel nuts.
...
