Cleaning Exterior Lamps/Lenses and Emblems
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps and lenses.
Follow instructions under "Washing the Vehicle" later in this section.
See also:
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle. 2. Press and release
. 3. Immediately after completing Step
2, press and hold until the turn signal
lamps flash, or for about two seconds if the vehicl ...
Heated and Ventilated Seats
On vehicles with heated and ventilated seats, the
controls are located on the front doors and the ignition
must be on to use the feature.
: Press to heat the seat and
seatback.
: Press to he ...
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code.
Any time you rotate your vehicle’s tires or replace one or
more of the TPMS sensors, the identification codes
will need to be matched to the n ...
