Exterior Lighting

The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.

The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.

The knob returns to the AUTO position after it is released. Turn to off again to reactivate the AUTO mode. : Turns off the exterior lamps.

The knob returns to the AUTO position after it is released. Turn to off again to reactivate the AUTO mode.

In Canada, the headlamps will automatically reactivate once the vehicle is shifted out of P (Park).

AUTO: Automatically turns the exterior lamps on and off, depending on outside lighting.

The current status of the AUTO system is displayed in the Driver Information Center (DIC) display.

See Driver Information Center (DIC) .

: Turns on the headlamps, parking lamps, instrument panel lights, and other exterior lighting. : Turns on the parking lamps, instrument panel lights, and other exterior lighting.

For more information, see: : Turns on the headlamps, parking lamps, instrument panel lights, and other exterior lighting.

For more information, see:

► Exterior Lamp Controls .
► Daytime Running Lamps (DRL) .
► Fog Lamps .

    See also:

    Modest Power, at Best
    The 2.4-liter four-cylinder generates 182 horsepower, versus the 3.0-liter's 255 hp (252 hp with all-wheel drive) and the 3.6-liter's 280 hp. The CX comes only with front-wheel drive and either th ...

    Turn Signals When Towing a Trailer
    The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you’re about to turn, cha ...

    Programming Universal HomeRemote — Fixed Code
    Fixed Code garage door openers are used for garage doors produced prior to 1996. Fixed code uses the same coded signal every time, which is manually programmed by setting DIP switches for a unique ...