3.6L V6 Engine
If the temperature overheat gauge is no longer in the overheat zone or an engine coolant temperature warning light no longer displays, the vehicle can be driven. Continue to drive the vehicle slowly for about 10 minutes.
Keep a safe vehicle distance from the vehicle in front. If the warning does not come back on, continue to drive normally.
If the warning continues, pull over, stop, and park the vehicle right away.
If there is no sign of steam, idle the engine for three minutes while parked. If the warning is still displayed, turn off the engine until it cools down. Also, see Overheated Engine Protection Operating Mode.
See also:
Tire Sealant
Read and follow the safe handling
instructions on the label adhered to
the compressor.
Check the tire sealant expiration
date on the sealant canister. The
sealant canister should be replaced ...
Driving Through Flowing Water
CAUTION:
Flowing or rushing water creates strong
forces. If you try to drive through flowing
water, as you might at a low water
crossing, your vehicle can be carried
away. As little as six inch ...
Door Ajar Messages
DRIVER DOOR OPEN
This message will display when the driver door is open. Close the door completely.
HOOD OPEN
This message will display when the hood is open. Close the hood completely.
LEFT REAR ...
