2.4L L4 Engine

2.4L L4 Engine
2.4L L4 Engine

1. Remove the six screws on top of the engine air cleaner/filter housing.

2. Lift the filter cover housing away from the engine air cleaner/filter housing.

3. Pull out the filter.

4. Inspect or replace the engine air cleaner/filter.

5. Lower the filter cover housing toward the engine.

6. Install the six screws on the top of the housing to lock the cover in place.

    See also:

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake peda ...

    Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
    A. Back-Up Lamp B. Turn Signal Lamp To replace one of these lamps: 1. Open the trunk. See Trunk. 2. Remove the fasteners and pull back the trunk trim. 3. Remove the four plastic wing nuts h ...

    Fog Lamps
    Use the fog lamps for better vision in foggy or misty conditions. The ignition must be in RUN for the fog lamps to work. The fog lamp button is located on the instrument panel to the right of ...