See also:

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister which ...

Using the Directory Command
The directory command lists all of the name tags stored by the system. To use the directory command: 1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. ...

Oil Pressure Light
WARNING: Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serv ...