See also:

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister which ...

Jump Starting
For more information about the vehicle battery, see Battery . If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following step ...

Entry Lighting
The headlamps, parking lamps, taillamps, and most of the interior lamps turn on briefly when is pressed on the Remote Keyless Entry (RKE) transmitter. After about 30 seconds the exterior lamps ...