Manual Operation
(Power): Press to turn the fan on or off.
(Fan Control): Press to increase or decrease the fan speed.
The fan speed setting appears on the main display. Pressing either button cancels automatic fan control and the fan can be controlled manually. Press AUTO to return to automatic operation.
(Air Delivery Mode Control): Press to change the direction of the airflow. The current mode appears in the display screen.
Pressing either button cancels automatic air delivery control and the direction of the airflow can be controlled manually. Press AUTO to return to automatic operation.
To change the current mode, select one of the following:
(Vent): Air is directed to the instrument panel outlets.
(Bi-Level): Air is divided between the instrument panel outlets and the floor outlets.
(Tri-Level): Air is divided between the windshield, instrument panel, and floor outlets.
(Floor): Air is directed to the floor outlets.
(Defog): Clears the windows of fog or moisture. Air is directed to the windshield and floor outlets.
(Defrost): Clears the windshield of fog or frost more quickly. Air is directed to the windshield. Selecting defrost will disable automatic control.
For best results, clear all snow and ice from the windshield before defrosting.
(Air Conditioning): Press to turn the air conditioning system on or off. If the fan is turned off or the outside temperature falls below freezing, the air conditioning system will not run.
Pressing this button cancels automatic air conditioning and turns off the air conditioner. Press AUTO to return to automatic operation and the air conditioner runs automatically as needed. When the indicator light is on, the air conditioner runs automatically to cool the air inside the vehicle or to dry the air needed to defog the windshield faster.
(Recirculation): Press to alternate between recirculating air inside the vehicle or pulling in outside air. When the indicator light is on, air is being recirculated inside the vehicle. This helps to quickly cool the air inside the vehicle or prevent outside air and odors from entering.
Pressing this button cancels automatic recirculation. Press AUTO to return to automatic operation and recirculation runs automatically as needed.
See also:
Playing a CD
If the ignition or radio is turned off, with a CD in the
player, it stays in the player. When the ignition or
radio is turned on, the CD starts playing where it
stopped, if it was the last selected ...
Engine Compartment Fuse Block
To open the fuse block cover, press the clips at the front and back and rotate
the cover up to the side.
Notice: Spilling liquid on any electrical component on the vehicle may damage
it. Always ...
Electrical System Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting th ...