Transferring a Call

Audio can be transferred between the Bluetooth system and the cell phone.

The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

To Transfer Audio from the Bluetooth System to a Cell Phone

During a call with the audio in the vehicle:

1. Press 2. Say “Transfer Call.”.

2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System from a Cell Phone

During a call with the audio on the cell phone, press transfers to the vehicle. If the audio. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.

    See also:

    Setting Cruise Control
    If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control button off when cruise is not being used. To set a speed: 1. Press to ...

    Taillamps, Turn Signal, Stoplamps and Sidemarker Lamps
    A. Sidemarker Lamp B. Stoplamp/Taillamp/Turn Signal Lamp To replace one of these bulbs: 1. Open the trunk. See Trunk. 2. Remove the convenience net. 3. Remove the plastic wing nuts retaining th ...

    Timer
    This display can be used as a timer. To start the timer, press SET/CLR while Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not i ...