Listing Stored Numbers
The list command will list all the stored numbers and name tags.
Using the “List” Command
1. Press 
. The system
responds “Ready,” followed by
a tone.
2. Say “Directory.”.
3. Say “Hands Free Calling.”.
4. Say “List.”
See also:
When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right
Engine Oil” in this section ...
Taillamps and Turn Signal Lamps
To replace a taillamp or turn signal bulb, do
the following:
1. Open the liftgate.
2. Remove the two
screws from the
taillamp assembly.
3. Pull the taillamp assembly away from the
vehicle ...
Jump Starting
If the vehicle’s battery has run down, you may want to
use another vehicle and some jumper cables to start
your vehicle. Be sure to use the following steps to do it
safely.
WARNING:
Batterie ...