Menu System

Controls

The Menu knob, SELECT button, and navigate the menu system. BACK button are used to navigate the menu system.

Menu Knob:

Turn to:

• Enter the menu system.

• Highlight a menu option.

• Select a value.

SELECT:

Press to:

• Select or activate the highlighted menu option.

• Confirm a set value.

• Turn a system setting on or off.

Press to: BACK:

Press to:

• Exit a menu.

• Return from a submenu screen to the previous menu screen.

• Delete the last character in a sequence.

    See also:

    Low-Beam Headlamps/Daytime Running Lamps (DRL), High-Beam Headlamps (Base)
    1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 2. Remove the outside cap for the low-beam headlamp/DRL bulb repla ...

    Window Messages
    OPEN, THEN CLOSE DRIVER WINDOW This message is displayed when the window needs to be reprogrammed. If the vehicle's battery has been recharged or disconnected, you will need to reprogram eac ...

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brak ...