Display Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate, then select Display Settings from the list.
The following options may display:
Dimming Mode: Press to change the screen background. The Automatic setting adjusts the screen background automatically depending on the exterior lighting conditions.
To change the overall brightness setting for the display, use the vehicle interior lighting instrument panel illumination control.
See also:
DVD Distortion
Video distortion can occur when
operating cellular phones, scanners,
CB radios, Global Position Systems
(GPS)*, two-way radios, mobile fax
machines, or walkie talkies.
It might be necessary t ...
What to Add
Use only new DOT 3 brake fluid from a sealed container.
See Recommended Fluids and Lubricants.
Always clean the brake fluid reservoir cap and the
area around the cap before removing it. This helps ...
How the System Works
URPA comes on automatically when
the shift lever is moved into
R (Reverse). A single tone sounds
to indicate the system is working.
URPA operates only at speeds less
than 8 km/h (5 mph).
An ...