Remote Recall

When on, this feature will recall the current driver's last seat and outside mirror positions upon unlocking the driver door with the RKE, and opening that door. The current driver is identified when the RKE is used to unlock the driver door. If keyless access equipped, the recall will occur upon opening the driver door.

See “Memory Remote Recall” under Power Seat Adjustment for more information.

This allows the Remote Recall feature to be turned on or off.

Remote Recall is when the memorized settings will be recalled as you unlock and enter the vehicle.

Press SELECT when Remote Recall is highlighted. Turn the Menu knob to select On or Off. Press SELECT to confirm the selection. Press Passive Entry BACK to move to the last menu.

    See also:

    Tire and Loading Information Label
    Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle center pillar (B-pillar). With the driver door open, you will find the label attached below the do ...

    Starting Procedure (Keyless Access)
    1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go ...

    Dolly Towing from the Front (Front-Wheel Drive)
    Dolly Towing from the Front (Front-Wheel Drive) Vehicles with front-wheel drive can be dolly towed from the front. Use the following procedure to dolly tow the vehicle from the front: 1. At ...