See also:

Without Selective Ride Control
1. Move the shift lever to the left from D (Drive). The transmission will enter Manual Mode. The DIC gear indicator will change to an M followed by a number representing the gear the vehicl ...

Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar A. Taillamp B. Turn Signal Lamp C. Stoplamp/Taillamp To replace any one of these bulbs: 1. Open the trunk. 2. Remove the push pins securing the trunk ...

Tire and Loading Information Label
Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle center pillar (B-pillar). With the driver door open, you will find the label attached below the do ...