See also:

Jump Starting (On-board with eAssist Only)
If the vehicle fails to crank, it may be jump started by using the eAssist battery to charge the 12-volt battery. Use the following procedure to activate the on-board jump start using the DIC ...

DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons on the turn signal lever to the left of the steering wheel. The DIC displays trip, fuel, vehicle system informat ...

Parking/Turn Signal Lamp
1. Open the hood. See Hood . 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straig ...