Arming the System
To arm the system, press 
on the
RKE transmitter.
The alarm automatically arms after about 30 seconds. The security light, located on the instrument panel, flashes.
Press 
on the RKE transmitter to
open the trunk without setting off the
alarm. The system rearms when the
trunk is closed.
See also:
Place a Call Using a Stored
Number
1. Push . System responds:
“OnStar ready.”.
2. Say “Call <name tag>.” System
responds: “OK, calling
<name tag>.” ...
When the System Does Not Seem to
Work Properly
If the URPA system will not activate due to a temporary
condition, the message PARK ASSIST OFF will be
displayed on the DIC and a red light will be shown on
the rear URPA display when the shift ...
Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar
A. Taillamp
B. Turn Signal Lamp
C. Stoplamp/Taillamp
To replace any one of these bulbs:
1. Open the trunk.
2. Remove the push pins securing the trunk ...