Canceling a Remote Start

To cancel a remote start, do any of the following:

• Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. until the parking lamps turn off.

• Turn on the hazard warning flashers.

• Turn the vehicle on and then off.

    See also:

    Removal and Installation of the Sealant Canister
    To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister which ...

    Turning the System On and Off
    The URPA system can be turned on and off using the park assist button located next to the shift lever. The LED next to the park assist button lights up when the system is on and turns off w ...

    Driving On Grades
    Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift down, you might have to use your brakes so much that they would get hot and no longer w ...