Traction Control System (TCS)

The traction control system limits wheel spin. The system turns on automatically every time the vehicle is started.

• To turn off traction control, press and release the Traction Control System (TCS)/StabiliTrak button located on the console to the right of the shift leverilluminates and the appropriate.

illuminates and the appropriate DIC message is displayed. See Ride Control System Messages.

• Press and release the TCS/StabiliTrak button again to turn on traction control.

For more information, see Traction Control System (TCS).

    See also:

    Finish Damage
    Any stone chips, fractures, or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Minor chips and scratches can be ...

    Exterior Lamp Controls
    The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel. Turn the control to the following positions: (Off): Turns off the exterior lamps. The ...

    Brake Fluid
    The brake master cylinder reservoir is filled with DOT 3 brake fluid. See Engine Compartment Overview for the location of the reservoir. There are only two reasons why the brake fluid level ...