See also:

Tire and Loading Information Label
Label Example A vehicle-specific Tire and Loading Information label is attached to the vehicle center pillar (B-pillar). With the driver door open, you will find the label attached below the do ...

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister ...

Rear Compartment Fuse Block
The rear compartment fuse block, if equipped, is located on the left side of the trunk behind a cover. The vehicle may not be equipped with all of the fuses, relays, and features shown. ...