Tires

Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.

. Poorly maintained and improperly used tires are dangerous. WARNING
. Poorly maintained and improperly used tires are dangerous.

► Overloading the tires can cause overheating as a result of too much flexing. There could be a blowout and a serious crash. See Vehicle Load Limits .

(Continued

. Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury.

Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when the tires are cold.

► Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when hitting a pothole. Keep tires at the recommended pressure.

► Worn or old tires can cause a crash. If the tread is badly worn, replace them.

► Replace any tires that have been damaged by impacts with potholes, curbs, etc.

. Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires.

► Do not spin the tires in excess of 55 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc.

Excessive spinning may cause the tires to explode.

See Tire Pressure for High-Speed Operation  for inflation pressure adjustment for high-speed driving.

    See also:

    Remote Control
    To use the remote control, aim it at the transmitter window below the video screen and press the desired button. Direct sunlight or very bright light may affect the ability of the RSE system to re ...

    Solid structure
    At the core of Rainier's quiet ride quality are best-in-class body-stiffness attributes. With its all-out dedication to isolation from road noise and vibration, Rainier achieves sound levels some ...

    XM Categories
    XM channels are organized in categories. Removing or Adding Categories Channels in a category that have been removed can still be accessed by using thes© or ¨\buttons, or the TUNE/MENU knob. ...