Front Turn Signal/Parking/Side Marker Lamps (Base and Up-Level)
To replace the front turn signal, parking lamp, or sidemarker lamp:
1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle.
2. Remove the bulb socket from the headlamp assembly by turning it counterclockwise.
3. Remove the bulb from the socket.
4. Replace the bulb in the bulb socket.
5. Install the bulb socket in the headlamp assembly by turning it clockwise.
6. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer.
See also:
Add-On Electrical Equipment
Notice: Do not add anything electrical to the vehicle unless you check with your
dealer first. Some electrical equipment can damage the vehicle and the damage would
not be covered by the vehicle&# ...
Linking to a Different Phone
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. Say “Bluetooth”. The system responds with
“Bluetooth ready” followed by a tone.
3. Say ...
Gate Ajar Light
If this light comes on,
the liftgate or liftglass is
not completely shut.
Close the liftgate or liftglass. Never drive with the
liftgate or liftglass even partially open. ...