Washer Fluid
What to Use
When windshield washer fluid is needed, be sure to read the manufacturer's instructions before use. If operating the vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview for reservoir location
Notice . When using concentrated washer fluid, follow the manufacturer's instructions for adding water.
► Do not mix water with ready-to-use washer fluid.Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system.
Also, water does not clean as well as washer fluid.
► Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid expansion if freezing occurs, which could damage the tank if it is completely full. ► Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint.See also:
If a Tire Goes Flat
It is unusual for a tire to blow out
while driving, especially if the tires
are maintained properly. See Tires. If air goes out of a
tire, it is much more likely to leak
out slowly. But if the ...
Navigation System
If your vehicle has a navigation system, use of the
system may result in the storage of destinations,
addresses, telephone numbers, and other trip
information. Refer to the navigation system ope ...
Sculpted design
Buick's long heritage of leading designs, such as the Y-Job Concept, the
Roadmaster and the Riviera, helped define American automobile design through the
years, according to Ed Welburn, vice presi ...