Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at the indicated mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank, but be sure the cooling system is cool before this is done.
The coolant surge tank is located in the engine compartment on the driver side of the vehicle. See Engine Compartment Overview for more information on location.
See also:
Radio Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate
to enter the menu options. Turn the TUNE/MENU knob or touch-tap the scroll bar to
scroll through the available option ...
Engine Drive Belt Routing
2.4L L4 Engine ...
When to Add Engine Oil
When to Add Engine Oil
If the oil is below the cross-hatched
area at the tip of the dipstick, add
1 L (1 qt) of the recommended oil
and then recheck the level. See
“Selecting the Right En ...