What to Use

Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will. WARNING
Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will.

The coolant warning system is set for the proper coolant mixture.

With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant.

Use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant. If using this mixture, nothing else needs to be added.

This mixture:

► Gives freezing protection down to −37°C (−34°F), outside temperature.

► Gives boiling protection up to 129°C (265°F), engine temperature.

► Protects against rust and corrosion.

► Will not damage aluminum parts.

► Helps keep the proper engine temperature.

Notice: If an improper coolant mixture is used, the engine could overheat and be badly damaged.

The repair cost would not be covered by the vehicle warranty.

Too much water in the mixture can freeze and crack the engine, radiator, heater core, and other parts.

Never dispose of engine coolant by putting it in the trash, pouring it on the ground, or into sewers, streams, or bodies of water. Have the coolant changed by an authorized service center, familiar with legal requirements regarding used coolant disposal. This will help protect the environment and your health.

    See also:

    Power Tilt Wheel and Telescopic Steering Column
    For vehicles with a power tilt control, it is located on the left hand side of the steering column. To adjust the power tilt wheel: • Push the control up or down to tilt the steering whe ...

    Locking Feedback
    This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Press SELECT when Locking Feedback is highlighted. Turn the Menu knob to select Ligh ...

    Compass Calibration
    Press and hold the on/off button to activate the compass calibration mode. CAL will be displayed in the compass window on the mirror. The compass can be calibrated by driving the vehicle in circ ...