Hood

To open the hood:

1. Pull up on the hood release handle with this symbol on it.

1. Pull up on the hood release handle with this symbol on it.

It is located inside the vehicle to the left of the steering column.

2. Go to the front of the vehicle and move the secondary hood release handle to the right.

2. Go to the front of the vehicle and move the secondary hood release handle to the right.

To close the hood:

1. Before closing the hood, be sure all the filler caps are on properly.

2. Lower the hood 30 cm (12 in) above the vehicle and release it so it fully latches. Check to make sure the hood is closed and repeat the process if necessary.

    See also:

    Compass
    There is a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle ...

    Gasoline Specifications
    At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadie ...

    Emergency Trunk Release Handle
    Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle. The emergency trunk release handle is only in ...