What to Use

WARNING:
Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant.

Use a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant. If using this mixture, nothing else needs to be added. This mixture:

• Gives freezing protection down to −34°F (−37°C), outside temperature.

• Gives boiling protection up to 265°F (129°C), engine temperature.

• Protects against rust and corrosion.

• Will not damage aluminum parts.

• Helps keep the proper engine temperature.

Notice: If an improper coolant mixture is used, the engine could overheat and be badly damaged.

The repair cost would not be covered by the vehicle warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core, and other parts.

Notice: If extra inhibitors and/or additives are used in the vehicle’s cooling system, the vehicle could be damaged. Use only the proper mixture of the engine coolant listed in this manual for the cooling system. See Recommended Fluids and Lubricants for more information.

    See also:

    Finding a Station
    BAND: Press to switch between FM, AM, or XM™ (if equipped). The selection displays. (Tune): Turn to select radio stations. : Press to go to the previous or the next station and stay ther ...

    Video Screen Input Jack
    Each video screen is equipped with a video input jack to allow video cables to be connected from an auxiliary device such as a camcorder or a video game system. This signal will override any ...

    Speedometer
    The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph). ...