Muting a Call
During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them.
To Mute a call
1. Press
.
The system responds “Ready,” followed by a tone.
2. Say “Mute Call.” The system responds “Call muted.”
To Cancel Mute
1. Press
.
The system responds “Ready,” followed by a tone.
2. After the tone, say “Mute Call.” The system responds “Resuming call.”
See also:
Programming Universal HomeRemote — Fixed Code
Fixed Code garage door openers are used for
garage doors produced prior to 1996. Fixed code
uses the same coded signal every time, which
is manually programmed by setting DIP switches
for a unique ...
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are working properly.
Look for any other loose or damaged safety belt system p ...
Programming with a Recognized Transmitter (Keyless Access Vehicles Only)
A new transmitter can be programmed to the vehicle when there is one recognized
transmitter. To program, the vehicle must be off and all of the transmitters, both
currently recognized and new, mus ...