How the System Works

URPA comes on automatically when the shift lever is moved into R (Reverse). The rear display briefly illuminates to indicate the system is working.

URPA operates only at speeds less than 8 km/h (5 mph). If the vehicle is above this speed, the red light on the rear display will flash.

To be detected, objects must be at least 25 cm (10 in) off the ground and below trunk level. Objects must also be within 2.5 m (8 ft) from the rear bumper. This distance may be less during warmer or humid weather.

A single beep will sound the first time an object is detected between 1 m (40 in) and 2.5 m (8 ft) away.

Beeping will occur continuously when the vehicle is at 0.6 m (23 in) or closer to an object.

The following describes what will occur with the URPA display as the vehicle gets closer to a detected object:

The system can be disabled through the Driver

The system can be disabled through the Driver Information Center (DIC). See “Park Assist” under DIC Operation and Displays for more information.

    See also:

    Bluetooth Controls
    Use the buttons located on the infotainment system and the steering wheel to operate the Bluetooth system. Steering Wheel Controls (Push to Talk): Press to answer incoming calls, confirm system ...

    Interior
    In standard form, the Rendezvous seats five occupants, but its reconfigurable interior can be equipped with third-row seats that hold two additional people. The second row can have either a three- ...

    Climate and Air Quality
    Select the Climate and Air Quality menu and the following may be displayed: • Auto Fan Speed • Air Quality Sensor • Auto Heated Seats • Air Conditioning Mode • Remote Start Auto Hea ...